Speed up ur net

liek broadband
here simple trick how u hack
go start> run> type regedit

in registry

HKEY_local_MACHINE\ SOFTWARE\ Microsoft\ Windows NT\ CurrentVersion\ Ports

Modify the default string value of the port. For example. COM1 is 9600,n,8,1" By default; you can modify it to "921600,n,8,1,p"

IN ALL com1 ,2,3,4,5

WARNING; Do this ONLY if using Dial-up (analogue) modems (e.g 56K, ISDN) Connected only to a serial Port (COMx), NOT IF modems! IF using internal Modems located in the communication Networking Riser (CNR) slot, do NOT use these settings! such cards are incompatible with these Settings.

Also, please don't expert you internet access speed to improve-if they do,well and good!

no need software it is simple trick

Hack DNS for lightning-fast Web browsing

No matter how big the broadband pipe you use to surf the Web, it's not big enough. Everyone, whether they use a slowpoke dial-up modem or the fastest FiOS line, wants to surf faster.

There's a simple way you can get to Web sites faster, and it won't cost you a penny. You can hack the way your PC uses the Domain Name System (DNS), the technology underlying all Web browsing. It's far simpler to do than you might imagine, as you'll see in this article.

Understanding DNS

Before you start, it's a good idea to get a basic understanding of how DNS works. When you type in a URL such as www.computerworld.com, that URL needs to be translated into a numeric IP address that Web servers and Internet routers can understand. When you type in a URL, a DNS server does the translation, from www.computerworld.com to 65.221.110.98, for example.


DNS servers live on the Internet, and your computer contacts them with the request to do that translation, which is commonly called name resolution. When you use an ISP, your computer will automatically use the default DNS servers specified by your ISP; you typically don't need to set up DNS in any way. If you're on a corporate network, your systems administrator may have set you up to use specific DNS servers.

If there's a delay in contacting the DNS server, or if the DNS server takes too much time resolving the address, you'll face a delay in getting to a Web site. So even if you've got the world's fattest pipe, your Web surfing will be slowed down.

If you could speed up the name resolution in some way, you'd be able to speed up your Web surfing. And that's exactly what I'll show you how to do.

Here's the simplest way to hack DNS to speed up your Web browsing: Use free, superfast DNS servers run by the OpenDNS service instead of your ISP's DNS servers. OpenDNS has a monstrously big DNS cache, with DNS servers around the world, so you'll be able to retrieve IP addresses from it more quickly than from your ISP's DNS servers.

As I'll explain a little later in this article, the service includes other benefits as well, such as letting you create browser shortcuts so that you could go to www.computerworld.com, for example, by just typing the letter c in your browser and pressing Enter.

The addresses of the OpenDNS servers are 208.67.222.222 for a primary DNS server and 208.67.220.220 for a secondary server.

To use the OpenDNS servers, you'll have to tell your computer to use them. If you have Windows XP, first select Control Panel --> Network and Internet Connections --> Network Connections, right-click your network connection from the Network Connections window, and select Properties
Scroll down to the Internet Protocol (TCP/IP) listing and select Properties. At the bottom of the screen, select "Use the following DNS server addresses." For the Preferred DNS server, enter this address: 208.67.222.222. For the Alternative DNS server, enter this address: 208.67.220.220. Click OK, and then click Close and Close again. Restart your PC in order for the settings to take effect

note
If you have a router, all you have to do is use the router's base address.

and never try touching/editing or so-call hack with ur dns.. until n unles u're open wid ur system n can freely take risks.. dnd being one of the most delicate parts... can make ur networkigng go towards hell if done sumthing wrongs... so beware!

HAKING UR BROADBAND

HAKING UR BROADBAND

Step 1: Download any port Scanner (i preffer Super Scan, IPscanner, gfi LAN nat secirity scanner)

Step 2: First Get your ip

Go to Command prompt type ipconfig /all
Hit enter.
You will see your ip as a clients ip.
suppose its 61.1.1.51

Step 3: write your ip in IP scanner Software and scan for alive IPs in the below range
start:61.1.1.1 to End:61.1.255.255


Step 4: Then check in your scanner which alive IPs has the port 80 open or 23 for telnet.


Step 5: if port 80 is open then Enter that IP in your web browser
if 23 port is open then u shd knw how to telnet it frm cmd........


Step 6: It asks for user ID AND password type

username =admin
password =admin or password

It is the default password for most of the routers.

if denied then use on another alive IP

Step 7: If success then it will show router settings page of tht IP user
There goto Home -> Wan Setting and the username and password of his account will appear there.

Step 8: use Show Password tools to view the password in asterisks ********.


now you have username and password ready for use.

Data Doctor Password unmask unhide program is a useful free utility to reveal passwords hidden behind the asterisk “*****” characters inside any protected password text box. It is a free utility tool and you do not need to buy any hacking software or any expensive password cracking utility to crack reset recover break or restore your forgotten password. If you have a password saved in memory and you forgot what it is, Software reveals MS Windows 98 NT ME 2000 XP 2003 passwords hidden with asterisks in password fields. Utility recover coded (*) passwords in password dialog boxes, web pages and ActiveX controls When user logins and passwords for all e-mail and newsgroups accounts stored by Outlook Express, Internet Explorer, Netscape or Opera web browser google gmail yahoo msn aol rediff indiatimes hotmail websites. Stealth E-mail Password Log key typed into the keyboard. Software like FTP Clients CuteFTP FlashFXP SmartFTP saves keystrokes can reveal by the tool. Professional Windows password breakers crackers or other related commercial password recovery services cost in thousands of dollars to reveal encrypted login security stored in password area. Data Doctor Password Unmask is a Free safe and non destructive utility. Just drag mouse pointer to the asterisk ***** password and view store password. There is no illegal password hacking technique involved, it only reads or uncovers hidden password character that are covered by asterisks. Complete ‘Source Code’ of Data Doctor Password Unmask software program is available for educational purpose. Features: * Software reveal email account password by only dragging the mouse over password field. * Password Recovery software reset Windows 98 ME NT 2000 XP 2003 administrator password reveal lost or forgotten Microsoft Office XP Office 2003 Word Excel Power Point Access Outlook, VBA project Password. * Software retrieve archives ZIP WINZIP RAR ARJ ACE PDF files password.


Free download from Shareware Connection - Download free windows XP NT 2000 password recovery software source code reveal startup login recover reset saved passwords restore unhide unmask google gmail aol rediff hotmail yahoo msn email account text box characters hidden behind asterisk

Free download

How To Become A Hacker

Every thing about a hacker

How to make a telnet connection with Windows 95/98/NT

What is a Telnet connection? A telnet connection is a text only connection that is basically a left-over from when computer were much more expensive than they are now. It is text only, which means no pictures, no downloading, etc.

Why make a telnet connection? There are 3 primary reasons: 1. To check your disk quota, 2. It is the only way you can change your password, and 3. To be able to read mail when you’re not on your own computer.

How to make a telnet connection with Windows 95/98/NT

Making a Telnet connection to WCNet is very simple under any of the Microsoft Windows family of products as Microsoft has included a version of Telnet with all of it’s OS’s.

1. Make your normal PPP connection to the internet.
2. Once you have connected, go to the start button in the lower left hand corner of the screen.
3. Click on RUN
4. Type this: telnet woody.wcnet.org
5. Hit OK.

When you hit OK, a white window should come up that looks like this:

At this point you need to type in your login name from the information sheet WCNet sent you when you initially signed up. Hit return, and the system will next ask you for your password. If you typed either your login name or your password inco rrectly, you will be asked a second time for your login name and password. Check your information to make sure you have both correct. If you typed both correctly you will next see what looks like the Wood County courthouse made out of text. At that poi nt you may use the up and down arrows, but the mouse will not work on this window. Hit the down arrow approximately 4 times and you will see "Electronic Mail and USENET News reading" highlighted. Hit enter there to see what electronic mail is waiting for you on the WCNet server. If you down arrow a total of 7 times you can forward your WCNet mail to another address, and right below it is the option to turn forwarding off. If you down arrow 11 times you will see the option to change your WCNet password. This changes the password for both mail and dial up access to WCNet. The option directly below change password is check your account expiration date. And finally if you down arrow a total of 13 times you will see the option to check ho w much of your allotted disk space you are using. Along the bottom of many of these screens are directions both on what options are available to you, and how to exit.

Some thing about telnet

Run the command prompt.
Telnet from your computer to the mail server by using this command:
telnet hostname/IP 110

The mail server will respond with either:
-ERR for a wrong command
+OK for a correct command

Commands for entering user name and password are
* USER userid
After the connection write this command. Put the userid instead of the full e-mail address like some.guy rather than some.guy@someguy.com.
* PASS password
This is for entering the password.

The POP3 servers expects a programs input rather than a human input, so it doesn’t appreciate a typing error. So it doesn’t recognize the backspace or delete keys.

Other Commands that you can use are:

* STAT
The response to this is:
+OK #msgs #bytes
Where #msgs is the number of messages in the mail box and #bytes is the total bytes used by all messages.
* LIST
The response to this lists a line for each message with its number and size in bytes, ending with a period on a line by itself.
Sample response:
+OK 3 messages
1 1205
2 305
3 344400
.
* RETR msg#
This retrieves the specified message “msg#” (and displays it on the Telnet screen). You probably don’t want to do this in Telnet (unless you have turned on Telnet logging).
* TOP msg# #lines
This is an optional POP3 command. Not all POP3 servers support it. It lists the header for “msg#” and the first “#lines” of text in the message.
For example, TOP 1 0 would list just the headers for message 1, whereas TOP 1 5 would list the headers and first 5 lines of the message text.
* DELE msg#
This marks message number “msg#” for deletion from the server. This is the way to get rid of a problem causing message. It is not actually deleted until the QUIT command is issued. If you lose the connection to the mail server before issuing the QUIT command, the server shouldn’t delete any messages.
* RSET
This resets (unmarks) any messages previously marked for deletion in this session so that the QUIT command will not delete them.
* QUIT
This deletes any messages marked for deletion, and then logs you off of the mail server. This is the last command to use.

Everything about IP.

What is IP and how to get the IP of a remote system::

Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your ISP and it is assigned to you by your ISP. IP of a system which is always on the network remains generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim’s computer.
Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses:


Address Class Dotted Decimal Notation Ranges
Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx
Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx
Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx

The various classes will be clearer after reading the next few lines.

Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.
In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".


A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as
"24's" and is commonly used by most ISP's.

Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.

Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:

xxx.xxx.zzz.yyy

where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e. yyy is variable.
***********************

For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?

So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.

This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.


In my country, say there are three main ISP’s:

ISP Name Network Address Allotted

ISP I 203.94.47.xx
ISP II 202.92.12.xx
ISP III 203.91.35.xx

Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.

Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISP’s in the world, could you? If yes please send it to me J.

Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.
Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft’s version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :

Proto : It shows the type of protocol the connection with the remote system is using.
Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.


Foreign Address :: It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with –n switch then you directly get the IP of the victim but if the netstat is executed without –n switch then you will get the address of the remote system. Something like

C:\netstat
Proto Local Address Foreign Address State
TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED

Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.

Proto Local Address Foreign Address State
TCP abhisek:1031 64.4.xx.xx:80 ESTABLISHED

Now you got the IP address of hotmail ass 64.4.xx.xx .
Similarly you can figure out the IP address of most http or ftp connections.

To know your own IP type the following command in a dos windows
C:\netstat –n
[this commands converts the IP name into IP addresses]
this is what you will probably see on typing the above command :

Proto Local Address Foreign Address State
TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED
TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2
TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT
TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT
TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT
TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED
TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT

Here 203.xx.251.161 is your IP address.

Now lets clarify the format used by netstat :

Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.
Below I have produced a list of ports and popular services generally found to be running.
21 :: FTP port
80 :: http port
23 :: Telnet port

Note: If your execute the netstat command and find ports like 12345,27374 are open and are in use then make it sure that your sweat heart computer is infected with her boyfriend.. J J J J I mean your computer is infected with some sort of Trojan.
Below I have produced a list of commonly known Trojans and the ports they use by default. So if you find these ports open then get a good virus buster and get these stupid servers of the Trojans kicked out. Well if you want to play with these Trojan by keeping them in your computer but not letting them ruin your system performance then just disble it from the system registry run and they wont be loaded to memory each time when windows starts up[This trick doesn’t work for all Trojans].

Netbus :: 12345(TCP)
Subseven :: 27374(TCP)
Girl Friend :: 21554(TCP)
Back Oriface :: 31337 (UDP)

Well guys and gals I hope you are now well familiar with the term IP and what is the utility of IP in cyber world and how to get the IP of a remote system to which you are connected. I hope you find my writings very easy to undertstand. I know I lack the capacity of explaining myself but I try my level best to make things very easy and clear for you’ll.

How to get the IP of a remote system while chatting through msn messenger ::

This is a tutorial on how to get IP address from MSN messenger. This is actually
a really easy thing to do. It is not like going through the hard time and reversing
MSN messenger like many people think.
The IP address is only given when you accept or are sending a file through MSN
messenger. When you send IM's, the message is sent through the server thus hiding
your victims IP and your. But when you send a file or recieve a file, it is direct
connection between the two computers.
To obtain the IP accept a file transfer or send a file to the victim, when the file
sending is under way from the dos prompt type "netstat" without the quotation marks.

Convert an IP address to an IP Number
IP address (IPv4 / IPv6) is divided into 4 sub-blocks. Each sub-block has a different weight number each powered by 256. IP number is being used in the database because it is efficient to search between a range of number in database.

Beginning IP number and Ending IP Number are calculated based on following formula:

IP Number = 16777216*w + 65536*x + 256*y + z (Formula 1)

where
IP Address = w.x.y.z

For example, if IP address is "202.186.13.4", then its IP Number "3401190660" is based on the Formula 1.

IP Address = 202.186.13.4

So, w = 202, x = 186, y = 13 and z = 4

IP Number = 16777216*202 + 65536*186 + 256*13 + 4
= 3388997632 + 12189696 + 3328 + 4
= 3401190660

To reverse IP number to IP address,

w = int ( IP Number / 16777216 ) % 256
x = int ( IP Number / 65536 ) % 256
y = int ( IP Number / 256 ) % 256
z = int ( IP Number ) % 256

where % is the mod operator and int is return the integer part of the division.


HOW TO TRACK **IP ADD***


This is all the information you will need for now, I suggest you either keep your dos/command prompt window open or copy & paste the information somewhere, to copy right click the window and select text and click once.

Changing your IP Address
To change your ip address first pick any ip you like out of your ip range and remember it or write it down. It is usually a good idea to make sure the ip is dead (except for what we are going to do later on) so just ping it via "ping x.x.x.x" and if it times out then you can use it. Now go to My Computer, then Control Panel. In Control Panel select Network Connections and pick your active connection, probably Local Area Connection or your ISP name. Open that connection by double clicking on the icon in Network Connections, then select Properties under the General Tab. In the new window that pops up select Internet Protocol (TCP/IP) and click properties, it's under the general tab. In this new window select the General tab and choose "Use the following IP address" and for the IP address enter the ip you would like to use (the one you picked from your subnet earlier) and for the Subnet Mask enter the subnet mask you got when your ran ipconfig /all, same goes for the Default Gateway. Now select "Use the following DNS server addresses" and enter the information you got earlier. Now just click OK. Test that it worked, try to refresh a website and if it works you know everything is okay and you are connected. To make sure the change worked type ipconfig agein and the ip address should have changed to your new one.

DDoS & DoS Protection
If your firewall shows that you are being ddosed, this is usually when you are constantly getting attempted UDP connections several times a second from either the same ip address or multiple ip addresses (ddos), you can protect your self by changing your ip address via the method i described above.

Webservers & Other Services
If you know someone on your ip range is running a webserver and he or she has pissed you off or you just like messing around you can "steal" their ip address so any dns going to that ip will show your site instead because you would be running a webserver your self.

To "steal" an ip is to basically use the changing ip address method above and picking an ip that someone that is running a webserver has in use. Often you will be able to keep that ip at least for some time, other times you wont be able to use it so just keep trying until it works. You your self will need to have a web server on the same port with your message. You can do this with other services too. You can also DoS or DDoS the ip address you are trying to steal to kick him off the net, but I dont recommend as its pretty illegal, your isp will get pissed and feds may go ape-####.



IP ADDRESS THROUGH MESSENGER
open a conversation with the fellow whu's ip yu wanna find

Go to RUN
type "cmd"
a black window appears [command prompt]
in that type "netstat"
it gives yu one/more ip numbers
the top one will always be of the person with whum yu are chatting

to avoid confusion...close all other conversations

other way
You wont get a IP address of the PErson by just doing that while IM'ing u cant get the IP address so better send some file or photo to other person and persue Him/her to accept it and at that time during the file sharing u used Open
1) Command promt
2) Type in "netstat -n" without quotes

then u will get the IP address

TO TRACE IP ADDRESS



sm other lnks ////

ip-address.com
..
use the following sites to trace IPs:

http://arin.net - North America

http://apnic.net - Asia Pacific

http://ripe.net - South America


use this for any IP address in Asia Pacific:

http://wq.apnic.net/apnic-bin/whois.pl





WAT THE INFO .... LIKE IF THIS IS THE IP 203.130.28.197
THN
IP address info:
IP address: 203.130.28.197 (copy)
IP country: Pakistan
IP Address state: Sindh
IP Address city: Karachi
IP latitude: 24.866699
IP longitude: 67.050003
ISP: SUPERNET Limited
Organization: SUPERNET Limited

ETC
ETC.......